Undergoung Utilities and their Standard Colors
If you find underground utilities, you can easily determine what type of utility it is for. However, a long time ago, it was difficult to identify these utility lines and so when people try to dig there were many risks involved. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. It is thus important that we know how to identify these underground utilities if there is a need to dig the ground so that you can prevent harm. The OSHA requires that utilities underground first be located before digging through a piece of land. You dont want something disastrous to occur. Fatal injuries can happen if underground utility lines are struck. It can also interrupt services in your area where the line is located. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.
But, despite the marks, there will sill be accidents. It is said that every 6 minutes, there is a utility line that is struck. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. This is then something that affects public health and safety.
With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. This has made it easier to locate utility lies underground and other important things. Companies can locate their utility lines if any property owner calls 811.
It is easier to identify underground utility lines today because they now use different colors for each utility. Below are some of the colors used for different utility lines.
Proposed excavation sites use white lines. It locates areas that will be excavated in the near future.
If you see pink lines, they are temporary survey markings. These are used by surveyors to mark off legal property boundaries.
Red lines are used to mark electric power lines, cable, conduit, and lighting cable. This color is appropriate for electrical works since it is associated with fire and danger.
If you see yellow lines, then they are lines for gas, oil, steam, petroleum, and gaseous materials. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.
If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. If you see blue lines then these are lines for potable water. Reclaimed water, irrigation, and slurry lines used purple lines. Green lines are used for sewer and drain lines. You can derail any project for a long time if you hit these lines.